Horizontal Double Slide Injection Molding Machine

1. The use of LCD display, a variety of functions show clear and unambiguous, random storage of 200 sets of molding parameters of the module.
2. Injection molding and mold clamping adopts multi-stage pressure and speed control, which can be set according to the requirements of the product, and it is easy to adjust to ensure the precision of the product.
3. High-precision P.I.D. temperature control, stable temperature control in each segment with small error.
4. Injection system adopts double injection cylinders, double seat cylinders, double guide column design, smooth movement, high injection precision.
5. Special design of screw and material pipe group, suitable for different injection molding process requirements.
6. Configured with high torque and low noise hydraulic motor, which makes the plasticizing ability more excellent.
7. Adopting high quality self-lubricating bearings in the movable parts, which makes the maintenance of the machine more convenient.
8. Enhanced design of slide machine frame ensures more accurate and stable mold sliding action.
9. Dual-position slide plate, two lower molds in the same plane, alternating left and right, a mold molding work and a mold outside to pick up pieces, high operational safety and can improve work efficiency by 30% -50%.
10. Equipped with blowing device for easy demolding.
11. Suitable for all kinds of cosmetic, soft bottle injection head production.ing Machine.
12. When the double-slide injection molding machine is turned on, it needs to be carried out in a certain order, including turning on the air switch to energize the machine, pressing the manual key to display the status screen, setting the temperature of each zone, and energizing the heating, Setting pressure, flow, time, position, start the oil pump motor and other steps. After all the settings are completed, sample making is carried out, including checking whether the action meets the requirements, keeping warm, adding materials, and closing the safety door, storage, injection and demolding, etc.
13. When shutting down the machine, it is necessary to open the mold and take out the products, then turn off the electric heat, spray rust inhibitor in the demolding mold, turn off the motor, etc. for maintenance.
14. Can not produce products when the actual temperature is not up to the set temperature, replace the mold need to turn off the motor after the operation, the material sample should be dry before injection, after making products should be cleaned with pure PP or PE material.
15. Warm tips: girls with long hair should tie their hair to prevent injuries.

Hot Tags: horizontal double slide injection molding machine, China horizontal double slide injection molding machine manufacturers, suppliers, factory, Automated Injection Molding Machine, Used Plastic Injection Machine, Large Plastic Injection Molding Machine, Plastic Molder, Vertical Plastic Molding Machine, Hand Operated Injection Molding Machine