Description

Technical Parameters

Product Features:

1. The host part of the equipment, the two injection units are all-electric control.
2. The total pressure part of the full servo control, with instantaneous startup smooth, small rotational inertia, fast response speed and energy saving and environmental protection and other notable features, the whole machine precision, stability.
3. The back side of the injection molding machine to increase the electric injection system as the injection mechanism, the accuracy of the quality of the improvement, injection position accuracy of less than 0.01mm.
4. It is mainly used in the overmolding of precision products.
5. This model can be matched with single-slide, double-slide, right-angle slide, and round disk.
6. Molding machine usually refers to the injection molding machine, the working principle is to heat the plastic granules to the molten state, through the thrust of the screw or plunger to inject the molten plastic into the closed mold, to be cooled and cured to open the mold to take out the finished product.
7. The molding machine is mainly suitable for thermoplastic plastics, such as polyethylene (PE), polypropylene (PP), polystyrene (PS), etc. These materials can become viscous flow state when heated, and then cured and molded after cooling.
8. The molding machine is suitable for producing all kinds of plastic products with complex shapes and precise dimensions, such as the shell of home appliances, toys, automobile parts and so on.
9. The processing cycle of the molding machine is usually shorter, which can realize high efficiency production.
10. The molding machine is mainly composed of injection system, clamping system, hydraulic system, electrical control system and so on.

Hot Tags: molding press, China molding press manufacturers, suppliers, factory, Hydraulic Plastic Injection Molding Machine, Automatic Moulding Machine, Used Vertical Injection Moulding Machine, Vertical Plastic Molding Machine, Hydraulic Plastic Machine, Vertical Standard Moulding Machine

DESCRIPTION		UNIT	JM-150S/SS/S2S/SRS		JM-300S/SS/S2S/SRS		JM-400S/SS/S2S/SRS		JM-550S/SS/S2S/SRS		JM-850S/SS/S2S/SRS		JM-1000S/SS/S2S/SRS		JM-1200S/SS/S2S/SRS		JM-1600S/SS/S2S/SRS		JM-2000S/SS/S2S/SRS		JM-2500S/SS/S2S/SRS		JM-3000S/SS/S2S/SRS		JM-4000S/SS/S2S/SRS		JM-5000S/SS/S2S/SRS		JM-6000S/SS/S2S/SRS		JM-6000S/SS/S2S/SRS
INJECTION UNIT	Screw Diameter	mm	22	25	25	28	28	32	32	35	35	40	40	45	45	50	50	55	55	60	65	70	75	85	80	90	90	100	95	105	100	110
	Injection Pressure	kg/cm²	1851	1433	1815	1446	2000	1531	2051	1713	1943	1488	1890	1493	1918	1553	1855	1533	2036	1710	2326	2005	2160	1685	1903	1503	1503	1218	1560	1278	1409	1164
	Theoretical Injection Volume	cm³	38	49	54	68	86	113	129	154	173	226	226	286	315	391	470	568	712	847	1376	1595	1830	2350	2080	2640	2640	3259	3890	4760	4315	5220
	Max. Shot Weight(PS)	g/oz	37/1.3	48/1.7	53/1.9	66/2.4	84/3	110/4	124/4.5	149/5	168/6.1	220/8	220/8	279/10	307/11	380/14	455/16	547/19	688/24	818/29	1328/48	1540/56	1771/64	2270/83	2015/73	2550/93	2574/93	3187/115	3760/137	4600/168	4172/152	5049/184
	Injection Rate	cm³/sec	26	34	42	53	46	59	53	63	78	102	116	147	149	182	150	180	155	184	136	158	200	250	245	310	465	574	450	550	496	601
	Screw Stroke	mm	100		110		140		160		180		180		240		240		300		415		415		415		415		550		550
	Screw Rotation Speed	rpm	0-200		0-200		0-200		0-180		0-220		0-275		0-370		0-235		0-220		0-200		0-240		0-240		0-240		0-180		0-180
CLAMPING UNIT	Clamping Force	ton	15		30		40		55		85		100		120		160		200		250		300		400		500		600		600
	Min. Mold Height	mm	100		120		200		220		250		280		300		300		300		400		400		400		400		500		500
	Opening Stroke	mm	180		180		200		200		250		280		300		300		400		400		400		400		400		500		500
	Max.Opening Distance	mm	280		300		400		420		500		560		600		600		700		800		800		800		800		1000		1000
	Distance Between Tie Bar	mm	275x135		355x205		400x250		500x340		560x340		580x420		610x510		750x580		860x530		800x530		890x590		890x590		890x590		1110x660		1110x660
	Platen Size	mm	430x290		520x370		580x430		720x560		795x575		830x670		830x740		1000x810		1130x800		1070x800		1180x880		1180x880		1180x880		1460x1010		1460x1010
	Sliding Platen Size	mm	S:250x270		S:350x350		S:420x396		S:500x495		S:500x545		S:580x570		S:750x600		S:810x740		S:800x840		S:800x780		S:880x880		S:880x880		S:880x880		S:1000x1000		S:1000x1000
			2S:500x270		2S:700x350		2S:840x396		2S:1000x495		2S:1020x545		2S:1160x570		2S:1500x600		2S:1620x740		2S:1600x840		2S:1600x780		2S:1760x880		2S:1760x880		2S:1760x880		2S:2000x1000		2S:2000x1000
			/		LS:350x350		LS:420x420		LS:495x495		LS:545x545		LS:570x570		LS:600x600		LS:740x740		LS:840x840		LS:780x780		LS:880x880		LS:880x880		LS:880x880		LS:1000x1000		LS:1000x1000
	Diameter Of Rotary Table	mm	/		680		800		900		1000		1000		1200		1400		1500		1500		1800		1800		2000		2200		2400
	Ejector Stroke	mm	35		35		35		45		55		65		75		150		150		150		150		150		150		150		150
	Ejector Force	ton	1.2		1.2		2.3		2.3		4		5.4		5.4		11		11		11		11		11		11		11		11
OTHERS	Max. Hydraulic Pressure	kg/cm²	140		140		140		140		140		140		140		140		140		140		140		140		140		140		140
	Oil Tank Capacity	L	120		150		180		230		280		350		400		500		600		600		700		700		700		800		800
	Pump Motor Power	kW	3		4		5.5		7.5		11		15		15		18.5		22		22		30		30		45		55		55
	Barrel Heating Power	kW	3		3.5		4.2		5.4		5.4		6.3		10		12		14		16		17		17		17		20		20
	Machine Weight	kg	900		1000		1500		2200		3000		4000		7000		7500		8000		8000		11000		12000		13000		15000		16000
	Machine Dimensions	m	/		/		/		/		/		/		/		/		/		/		/		/		/		/		/
Remarks: JM-150S stands for standard machine, SS stands for single slip, S2S stands for double slip, and SRS stands for round disk;

Molding Press

Product Features: