Product Features:
1. Low body, no height limitation for plant: the design of horizontal injection molding machine makes its body low, no special requirement for plant height, suitable for installation in various heights of the plant.
2. In case the products can be automatically demolded, automatic molding can be realized without manipulator: In case the products can be automatically demolded, horizontal injection molding machine can realize automatic molding without using manipulator.
3. Convenient material supply and easy maintenance: Due to the lower design of the machine body, material supply is more convenient and maintenance is easier.
4. Crane is needed for mold installation: Horizontal injection molding machine needs to use crane when installing molds.
5. Multiple side-by-side arrangement, molded products can be easily collected and packaged by conveyor belt: When multiple horizontal injection molding machines are arranged side-by-side, molded products can be easily collected and packaged by conveyor belt.
6. The servo energy-saving injection molding machine combines the advantages of the traditional hydraulic injection molding machine and automatic injection molding machine, and has the superior performance of energy-saving and environmental protection, high closed-loop precision, fast response speed and low noise. Under ideal working condition, compared with traditional injection molding machine, it can save 30% to more than 80% energy.
Hot Tags: horizontal energy saving injection molding, China horizontal energy saving injection molding manufacturers, suppliers, factory, Injection Moulders, Semi Automatic Vertical Injection Moulding Machine, Large Plastic Injection Molding Machine, Semi Automatic Injection Moulding Machine, Injection Moulding Used, ABS Injection Molding Machine
| MACHINE MODEL | UNIT | JM-108T | JM-140T | JM-170T | JM-200T | JM-220T | JM-268T | JM-300T | JM-350T | JM-428T | JM-538T | JM-650T | JM-1200T | JM-1600T | JM-2000T | JM-2500T | ||||||||||||||||||||||||||||||
| INJECTION UNIT | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | |
| Screw Diameter | mm | 32 | 35 | 38 | 40 | 42 | 45 | 40 | 45 | 50 | 45 | 50 | 55 | 50 | 55 | 60 | 55 | 60 | 65 | 60 | 65 | 70 | 65 | 70 | 75 | 75 | 80 | 85 | 80 | 85 | 90 | 85 | 90 | 100 | 38 | 42 | 45 | 40 | 45 | 50 | 45 | 50 | 55 | 50 | 55 | 60 |
| Screw L/D Ratio | L/D | 25 | 23 | 21 | 22 | 21 | 20 | 24 | 22 | 20 | 25 | 22 | 20 | 22 | 20 | 18.5 | 24 | 22 | 20.5 | 22 | 20.5 | 19 | 22 | 20 | 19 | 23 | 22 | 21 | 22 | 20.7 | 19.5 | 24.6 | 23.2 | 20.9 | 21 | 19 | 17.8 | 22.5 | 20 | 18 | 22 | 19.8 | 18 | 24 | 21.8 | 20 |
| Shot Volume | cm³ | 144.5 | 173 | 204 | 238.5 | 263 | 302 | 332.3 | 381.5 | 471 | 381.5 | 471 | 569.9 | 510.3 | 617.4 | 734.7 | 593.6 | 706.5 | 829.1 | 819.5 | 961.8 | 1115.4 | 1077.9 | 1250.1 | 1435 | 1633.7 | 1858.8 | 2098.5 | 1959.3 | 2211.9 | 2479.8 | 2892.5 | 3242.8 | 4003.5 | 232 | 284 | 326 | 301 | 381 | 471 | 413 | 510 | 617 | 549 | 665 | 791 |
| Actual Injection Volume | g | 131.5 | 157.4 | 185.6 | 217 | 239.3 | 274.8 | 302.4 | 347.2 | 428.6 | 347.3 | 428.6 | 518.6 | 464.4 | 561.8 | 668.6 | 540.2 | 642.9 | 754.5 | 745.7 | 875.2 | 1015 | 980.9 | 1137.6 | 1305.9 | 1486.9 | 1691.5 | 1909.6 | 1783 | 2012.8 | 2256.6 | 2632.2 | 2950.9 | 3643.2 | 211 | 258 | 296 | 273 | 346 | 428 | 375 | 464 | 561 | 499 | 605 | 719 |
| Injection Pressure | Mpa | 204 | 164 | 149 | 159 | 148 | 130 | 176 | 154 | 123 | 164 | 131 | 109 | 158 | 132 | 113 | 173 | 148 | 126 | 148 | 126 | 109 | 160 | 139 | 120 | 156 | 137 | 120 | 148 | 130 | 116 | 142 | 127 | 103 | 186 | 152 | 132 | 216 | 171 | 138 | 210 | 170 | 140 | 244 | 202 | 170 |
| CLAMPING UNIT | ||||||||||||||||||||||||||||||||||||||||||||||
| Clamp Tonnage | KN | 1080 | 1400 | 1700 | 2000 | 2200 | 2680 | 3000 | 3500 | 4280 | 5380 | 6500 | 1200 | 1600 | 2000 | 2500 | ||||||||||||||||||||||||||||||
| Toggle Stroke | mm | 325 | 380 | 430 | 440 | 490 | 550 | 580 | 625 | 750 | 770 | 920 | 380 | 440 | 490 | 580 | ||||||||||||||||||||||||||||||
| Space Between Tie-Bars | mm | 360×360 | 420×420 | 470×470 | 480×480 | 530×530 | 580×580 | 630×630 | 670×670 | 760×760 | 830×830 | 880×880 | 470*420 | 520*470 | 575*525 | 625*575 | ||||||||||||||||||||||||||||||
| Max. Mould Thickness | mm | 400 | 450 | 500 | 580 | 550 | 650 | 700 | 800 | 820 | 850 | 880 | 450 | 520 | 550 | 620 | ||||||||||||||||||||||||||||||
| Min. Mould Thickness | mm | 100 | 130 | 150 | 180 | 200 | 220 | 220 | 250 | 280 | 300 | 380 | 160 | 180 | 200 | 230 | ||||||||||||||||||||||||||||||
| Ejector Stroke | mm | 100 | 120 | 130 | 140 | 140 | 160 | 160 | 165 | 180 | 240 | 240 | 140 | 140 | 150 | 160 | ||||||||||||||||||||||||||||||
| Knockout Quantity | P | 5 | 5 | 5 | 5 | 5 | 9 | 9 | 13 | 13 | 13 | 21 | 5 | 5 | 5 | 9 | ||||||||||||||||||||||||||||||
| Ejector Tonnage | KN | 27 | 40 | 46 | 46 | 62 | 62 | 62 | 89 | 110 | 133 | 158 | 38 | 53 | 62 | 70 | ||||||||||||||||||||||||||||||
| OTHERS | ||||||||||||||||||||||||||||||||||||||||||||||
| Machine Weight | T | 2.9 | 3.2 | 4.5 | 5.2 | 6.4 | 7.8 | 9.1 | 11.9 | 16.5 | 19 | 21 | 4.8 | 5.7 | 7.8 | 10 | ||||||||||||||||||||||||||||||
| Motor Power | kW | 11 | 15 | 18.5 | 22 | 22 | 30 | 30 | 37 | 45 | 30+30 | 37+37 | 15 | 18.5 | 22 | 30 | ||||||||||||||||||||||||||||||
| Heater Power | kW | 6.3 | 8.7 | 10.8 | 12.5 | 14.9 | 17.4 | 17.4 | 18.5 | 31.3 | 33 | 43 | 7.4 | 9.9 | 11.5 | 13.5 | ||||||||||||||||||||||||||||||
| Overall Dimension | m | 4.1×1.1×1.65 | 4.2×1.2×1.8 | 5×1.4×1.8 | 5.2×1.3×2.2 | 5.6×1.4×2.2 | 6.1×1.5×2.3 | 6.4×1.5×2.4 | 7.5×1.9×2.4 | 7.8×2.0×2.3 | 8.1×2×2.3 | 9.2×2.1×2.4 | 4.5×1.4×1.8 | 5×1.5×1.9 | 5.5×1.6×2 | 5.9×1.8×2.3 | ||||||||||||||||||||||||||||||
| Max. Pump Pressure | Mpa | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 17.5 | 17.5 | 17.5 | 17.5 | ||||||||||||||||||||||||||||||
