Description

Technical Parameters

Product Features:

1. Inline closed mold horizontal side injection.
2. Screw three (four) sections temperature controller.
3. C-type machine body staff operation without the obstacle of the column, improve work efficiency.
4. The lower mold is fixed and the upper type is movable so that the inserted objects don't have to worry about shifting to ensure the precision of the molded products.
5. Low-voltage mold closing device can protect the safety of the mold.
6. Double sliding plate or disk can be added.

Hot Tags: horizontal thin wall injection molding machine, China horizontal thin wall injection molding machine manufacturers, suppliers, factory, Wire Molding Machine, Small Plastic Injection Machine, Electronica Injection Molding Machine, Vertical Moulding Machine, Rotary Injection Molding Machine, Plastic Injection Press

MACHINE MODEL	UNIT	JM-108T			JM-140T			JM-170T			JM-200T			JM-220T			JM-268T			JM-300T			JM-350T			JM-428T			JM-538T			JM-650T			JM-1200T			JM-1600T			JM-2000T			JM-2500T
INJECTION UNIT		A	B	C	A	B	C	A	B	C	A	B	C	A	B	C	A	B	C	A	B	C	A	B	C	A	B	C	A	B	C	A	B	C	A	B	C	A	B	C	A	B	C	A	B	C
Screw Diameter	mm	32	35	38	40	42	45	40	45	50	45	50	55	50	55	60	55	60	65	60	65	70	65	70	75	75	80	85	80	85	90	85	90	100	38	42	45	40	45	50	45	50	55	50	55	60
Screw L/D Ratio	L/D	25	23	21	22	21	20	24	22	20	25	22	20	22	20	18.5	24	22	20.5	22	20.5	19	22	20	19	23	22	21	22	20.7	19.5	24.6	23.2	20.9	21	19	17.8	22.5	20	18	22	19.8	18	24	21.8	20
Shot Volume	cm3	144.5	173	204	238.5	263	302	332.3	381.5	471	381.5	471	569.9	510.3	617.4	734.7	593.6	706.5	829.1	819.5	961.8	1115.4	1077.9	1250.1	1435	1633.7	1858.8	2098.5	1959.3	2211.9	2479.8	2892.5	3242.8	4003.5	232	284	326	301	381	471	413	510	617	549	665	791
Actual Injection Volume	g	131.5	157.4	185.6	217	239.3	274.8	302.4	347.2	428.6	347.3	428.6	518.6	464.4	561.8	668.6	540.2	642.9	754.5	745.7	875.2	1015	980.9	1137.6	1305.9	1486.9	1691.5	1909.6	1783	2012.8	2256.6	2632.2	2950.9	3643.2	211	258	296	273	346	428	375	464	561	499	605	719
Injection Pressure	Mpa	204	164	149	159	148	130	176	154	123	164	131	109	158	132	113	173	148	126	148	126	109	160	139	120	156	137	120	148	130	116	142	127	103	186	152	132	216	171	138	210	170	140	244	202	170
CLAMPING UNIT
Clamp Tonnage	KN	1080			1400			1700			2000			2200			2680			3000			3500			4280			5380			6500			1200			1600			2000			2500
Toggle Stroke	mm	325			380			430			440			490			550			580			625			750			770			920			380			440			490			580
Space Between Tie-Bars	mm	360×360			420×420			470×470			480×480			530×530			580×580			630×630			670×670			760×760			830×830			880×880			470*420			520*470			575*525			625*575
Max Mould Thickness	mm	400			450			500			580			550			650			700			800			820			850			880			450			520			550			620
Min Mould Thickness	mm	100			130			150			180			200			220			220			250			280			300			380			160			180			200			230
Ejector Stroke	mm	100			120			130			140			140			160			160			165			180			240			240			140			140			150			160
Knockout Quantity	P	5			5			5			5			5			9			9			13			13			13			21			5			5			5			9
Ejector Tonnage	KN	27			40			46			46			62			62			62			89			110			133			158			38			53			62			70
OTHERS
Machine Weight	T	2.9			3.2			4.5			5.2			6.4			7.8			9.1			11.9			16.5			19			21			4.8			5.7			7.8			10
Motor Power	kW	11			15			18.5			22			22			30			30			37			45			30+30			37+37			15			18.5			22			30
Heater Power	kW	6.3			8.7			10.8			12.5			14.9			17.4			17.4			18.5			31.3			33			43			7.4			9.9			11.5			13.5
Overall Dimension	m	4.1×1.1×1.65			4.2×1.2×1.8			5×1.4×1.8			5.2×1.3×2.2			5.6×1.4×2.2			6.1×1.5×2.3			6.4×1.5×2.4			7.5×1.9×2.4			7.8×2.0×2.3			8.1×2×2.3			9.2×2.1×2.4			4.5×1.4×1.8			5×1.5×1.9			5.5×1.6×2			5.9×1.8×2.3
Max. Pump Pressure	Mpa	14			14			14			14			14			14			14			14			14			14			14			17.5			17.5			17.5			17.5

Horizontal Thin Wall Injection Molding Machine

Product Features: