Product Features:
1. Vertical mold clamping, vertical injection, easy to pick and place inserts and finished products.
2. Feeding regulation and injection host integrated control.
3. Self-developed (20/200l) liquid silicone feeder with optional German 2KM host.
Multi-level precision mold electric temperature control. Liquid silica gel special hydraulic water-cooled closed nozzle, material pipe set.
4. Sandwich type heat-insulating fiber board, including heat-insulating board and close-fitting fiber board, to ensure that improve the life of the machine, to solve the stability problem and abrasive heat conduction caused by unnecessary energy waste problem.
5. The model can be matched with single slide, double slide, right-angle slide plate, disk.
| DESCRIPTION | UNIT | JM-150S/SS/S2S/SRS | JM-300S/SS/S2S/SRS | JM-400S/SS/S2S/SRS | JM-550S/SS/S2S/SRS | JM-850S/SS/S2S/SRS | JM-1000S/SS/S2S/SRS | JM-1200S/SS/S2S/SRS | JM-1600S/SS/S2S/SRS | JM-2000S/SS/S2S/SRS | JM-2500S/SS/S2S/SRS | JM-3000S/SS/S2S/SRS | JM-4000S/SS/S2S/SRS | JM-5000S/SS/S2S/SRS | JM-6000S/SS/S2S/SRS | JM-6000S/SS/S2S/SRS | ||||||||||||||||
| INJECTION UNIT | Screw Diameter | mm | 22 | 25 | 25 | 28 | 28 | 32 | 32 | 35 | 35 | 40 | 40 | 45 | 45 | 50 | 50 | 55 | 55 | 60 | 65 | 70 | 75 | 85 | 80 | 90 | 90 | 100 | 95 | 105 | 100 | 110 |
| Injection Pressure | kg/cm² | 1851 | 1433 | 1815 | 1446 | 2000 | 1531 | 2051 | 1713 | 1943 | 1488 | 1890 | 1493 | 1918 | 1553 | 1855 | 1533 | 2036 | 1710 | 2326 | 2005 | 2160 | 1685 | 1903 | 1503 | 1503 | 1218 | 1560 | 1278 | 1409 | 1164 | |
| Theoretical Injection Volume | cm³ | 38 | 49 | 54 | 68 | 86 | 113 | 129 | 154 | 173 | 226 | 226 | 286 | 315 | 391 | 470 | 568 | 712 | 847 | 1376 | 1595 | 1830 | 2350 | 2080 | 2640 | 2640 | 3259 | 3890 | 4760 | 4315 | 5220 | |
| Max. Shot Weight(PS) | g/oz | 37/1.3 | 48/1.7 | 53/1.9 | 66/2.4 | 84/3 | 110/4 | 124/4.5 | 149/5 | 168/6.1 | 220/8 | 220/8 | 279/10 | 307/11 | 380/14 | 455/16 | 547/19 | 688/24 | 818/29 | 1328/48 | 1540/56 | 1771/64 | 2270/83 | 2015/73 | 2550/93 | 2574/93 | 3187/115 | 3760/137 | 4600/168 | 4172/152 | 5049/184 | |
| Injection Rate | cm³/sec | 26 | 34 | 42 | 53 | 46 | 59 | 53 | 63 | 78 | 102 | 116 | 147 | 149 | 182 | 150 | 180 | 155 | 184 | 136 | 158 | 200 | 250 | 245 | 310 | 465 | 574 | 450 | 550 | 496 | 601 | |
| Screw Stroke | mm | 100 | 110 | 140 | 160 | 180 | 180 | 240 | 240 | 300 | 415 | 415 | 415 | 415 | 550 | 550 | ||||||||||||||||
| Screw Rotation Speed | rpm | 0-200 | 0-200 | 0-200 | 0-180 | 0-220 | 0-275 | 0-370 | 0-235 | 0-220 | 0-200 | 0-240 | 0-240 | 0-240 | 0-180 | 0-180 | ||||||||||||||||
| CLAMPING UNIT | Clamping Force | ton | 15 | 30 | 40 | 55 | 85 | 100 | 120 | 160 | 200 | 250 | 300 | 400 | 500 | 600 | 600 | |||||||||||||||
| Min. Mold Height | mm | 100 | 120 | 200 | 220 | 250 | 280 | 300 | 300 | 300 | 400 | 400 | 400 | 400 | 500 | 500 | ||||||||||||||||
| Opening Stroke | mm | 180 | 180 | 200 | 200 | 250 | 280 | 300 | 300 | 400 | 400 | 400 | 400 | 400 | 500 | 500 | ||||||||||||||||
| Max. Opening Distance | mm | 280 | 300 | 400 | 420 | 500 | 560 | 600 | 600 | 700 | 800 | 800 | 800 | 800 | 1000 | 1000 | ||||||||||||||||
| Distance Between Tie Bar | mm | 275x135 | 355x205 | 400x250 | 500x340 | 560x340 | 580x420 | 610x510 | 750x580 | 860x530 | 800x530 | 890x590 | 890x590 | 890x590 | 1110x660 | 1110x660 | ||||||||||||||||
| Platen Size | mm | 430x290 | 520x370 | 580x430 | 720x560 | 795x575 | 830x670 | 830x740 | 1000x810 | 1130x800 | 1070x800 | 1180x880 | 1180x880 | 1180x880 | 1460x1010 | 1460x1010 | ||||||||||||||||
| Sliding Platen Size | mm | S:250x270 | S:350x350 | S:420x396 | S:500x495 | S:500x545 | S:580x570 | S:750x600 | S:810x740 | S:800x840 | S:800x780 | S:880x880 | S:880x880 | S:880x880 | S:1000x1000 | S:1000x1000 | ||||||||||||||||
| 2S:500x270 | 2S:700x350 | 2S:840x396 | 2S:1000x495 | 2S:1020x545 | 2S:1160x570 | 2S:1500x600 | 2S:1620x740 | 2S:1600x840 | 2S:1600x780 | 2S:1760x880 | 2S:1760x880 | 2S:1760x880 | 2S:2000x1000 | 2S:2000x1000 | ||||||||||||||||||
| / | LS:350x350 | LS:420x420 | LS:495x495 | LS:545x545 | LS:570x570 | LS:600x600 | LS:740x740 | LS:840x840 | LS:780x780 | LS:880x880 | LS:880x880 | LS:880x880 | LS:1000x1000 | LS:1000x1000 | ||||||||||||||||||
| Diameter Of Rotary Table | mm | / | 680 | 800 | 900 | 1000 | 1000 | 1200 | 1400 | 1500 | 1500 | 1800 | 1800 | 2000 | 2200 | 2400 | ||||||||||||||||
| Ejector Stroke | mm | 35 | 35 | 35 | 45 | 55 | 65 | 75 | 150 | 150 | 150 | 150 | 150 | 150 | 150 | 150 | ||||||||||||||||
| Ejector Force | ton | 1.2 | 1.2 | 2.3 | 2.3 | 4 | 5.4 | 5.4 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | ||||||||||||||||
| OTHERS | Max. Hydraulic Pressure | kg/cm² | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | |||||||||||||||
| Oil Tank Capacity | L | 120 | 150 | 180 | 230 | 280 | 350 | 400 | 500 | 600 | 600 | 700 | 700 | 700 | 800 | 800 | ||||||||||||||||
| Pump Motor Power | kW | 3 | 4 | 5.5 | 7.5 | 11 | 15 | 15 | 18.5 | 22 | 22 | 30 | 30 | 45 | 55 | 55 | ||||||||||||||||
| Barrel Heating Power | kW | 3 | 3.5 | 4.2 | 5.4 | 5.4 | 6.3 | 10 | 12 | 14 | 16 | 17 | 17 | 17 | 20 | 20 | ||||||||||||||||
| Machine Weight | kg | 900 | 1000 | 1500 | 2200 | 3000 | 4000 | 7000 | 7500 | 8000 | 8000 | 11000 | 12000 | 13000 | 15000 | 16000 | ||||||||||||||||
| Machine Dimensions | m | / | / | / | / | / | / | / | / | / | / | / | / | / | / | / | ||||||||||||||||
| Remarks: JM-150S stands for standard machine, SS stands for single slip, S2S stands for double slip, and SRS stands for round disk; | ||||||||||||||||||||||||||||||||
Hot Tags: liquid silicone rubber injection molding machine, China liquid silicone rubber injection molding machine manufacturers, suppliers, factory, plastic injection blow moulding machine, 350 ton injection moulding machine price, Rubber Molding Press, Fully Automatic Vertical Injection Moulding Machine, Silicone Compression Molding Machine, Semi Auto Injection Moulding Machine
