Product Features:
1. Simplify the process: it can realize the high temperature and fast vulcanization of rubber products and shorten the production cycle.
2. Accurate product size: uniform physical and mechanical properties, high quality, especially suitable for the molding and vulcanization of thick-walled products.
3. Simple operation: reduce labor intensity, high degree of mechanization and automation.
4. Efficient production: suitable for the production of large quantities of molded products, improve production efficiency.
5. Precise temperature control: mold temperature 50-90 ℃, for the higher size requirements with high mold temperature.
6. Fast injection: in order to reduce internal stress and deformation, should choose high-speed injection, but some grades of PP and molds are not applicable.
7. Good exhaust: the mold must have good exhaust , exhaust hole depth 0.025mm-0.038mm, 1.5mm thick.
8. Wide applicability: PP material injection molded products are widely used in automotive, electrical, mechanical, instrumentation, radio, textile, national defense and other engineering parts, daily necessities, turnover, medical and health equipment, building materials and other fields.
Hot Tags: pp injection moulding machine, China pp injection moulding machine manufacturers, suppliers, factory, Molding Machine Automatic, desktop injection molding machine, Servo Injection Molding Machine, Silicone Compression Molding Machine, Used Injection Molder, Horizontal Thin Wall Injection Molding Machine
| MACHINE MODEL | UNIT | JM-108T | JM-140T | JM-170T | JM-200T | JM-220T | JM-268T | JM-300T | JM-350T | JM-428T | JM-538T | JM-650T | JM-1200T | JM-1600T | JM-2000T | JM-2500T | ||||||||||||||||||||||||||||||
| INJECTION UNIT | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | |
| Screw Diameter | mm | 32 | 35 | 38 | 40 | 42 | 45 | 40 | 45 | 50 | 45 | 50 | 55 | 50 | 55 | 60 | 55 | 60 | 65 | 60 | 65 | 70 | 65 | 70 | 75 | 75 | 80 | 85 | 80 | 85 | 90 | 85 | 90 | 100 | 38 | 42 | 45 | 40 | 45 | 50 | 45 | 50 | 55 | 50 | 55 | 60 |
| Screw L/D Ratio | L/D | 25 | 23 | 21 | 22 | 21 | 20 | 24 | 22 | 20 | 25 | 22 | 20 | 22 | 20 | 18.5 | 24 | 22 | 20.5 | 22 | 20.5 | 19 | 22 | 20 | 19 | 23 | 22 | 21 | 22 | 20.7 | 19.5 | 24.6 | 23.2 | 20.9 | 21 | 19 | 17.8 | 22.5 | 20 | 18 | 22 | 19.8 | 18 | 24 | 21.8 | 20 |
| Shot Volume | cm3 | 144.5 | 173 | 204 | 238.5 | 263 | 302 | 332.3 | 381.5 | 471 | 381.5 | 471 | 569.9 | 510.3 | 617.4 | 734.7 | 593.6 | 706.5 | 829.1 | 819.5 | 961.8 | 1115.4 | 1077.9 | 1250.1 | 1435 | 1633.7 | 1858.8 | 2098.5 | 1959.3 | 2211.9 | 2479.8 | 2892.5 | 3242.8 | 4003.5 | 232 | 284 | 326 | 301 | 381 | 471 | 413 | 510 | 617 | 549 | 665 | 791 |
| Actual Injection Volume | g | 131.5 | 157.4 | 185.6 | 217 | 239.3 | 274.8 | 302.4 | 347.2 | 428.6 | 347.3 | 428.6 | 518.6 | 464.4 | 561.8 | 668.6 | 540.2 | 642.9 | 754.5 | 745.7 | 875.2 | 1015 | 980.9 | 1137.6 | 1305.9 | 1486.9 | 1691.5 | 1909.6 | 1783 | 2012.8 | 2256.6 | 2632.2 | 2950.9 | 3643.2 | 211 | 258 | 296 | 273 | 346 | 428 | 375 | 464 | 561 | 499 | 605 | 719 |
| Injection Pressure | Mpa | 204 | 164 | 149 | 159 | 148 | 130 | 176 | 154 | 123 | 164 | 131 | 109 | 158 | 132 | 113 | 173 | 148 | 126 | 148 | 126 | 109 | 160 | 139 | 120 | 156 | 137 | 120 | 148 | 130 | 116 | 142 | 127 | 103 | 186 | 152 | 132 | 216 | 171 | 138 | 210 | 170 | 140 | 244 | 202 | 170 |
| CLAMPING UNIT | ||||||||||||||||||||||||||||||||||||||||||||||
| Clamp Tonnage | KN | 1080 | 1400 | 1700 | 2000 | 2200 | 2680 | 3000 | 3500 | 4280 | 5380 | 6500 | 1200 | 1600 | 2000 | 2500 | ||||||||||||||||||||||||||||||
| Toggle Stroke | mm | 325 | 380 | 430 | 440 | 490 | 550 | 580 | 625 | 750 | 770 | 920 | 380 | 440 | 490 | 580 | ||||||||||||||||||||||||||||||
| Space Between Tie-Bars | mm | 360×360 | 420×420 | 470×470 | 480×480 | 530×530 | 580×580 | 630×630 | 670×670 | 760×760 | 830×830 | 880×880 | 470*420 | 520*470 | 575*525 | 625*575 | ||||||||||||||||||||||||||||||
| Max. Mould Thickness | mm | 400 | 450 | 500 | 580 | 550 | 650 | 700 | 800 | 820 | 850 | 880 | 450 | 520 | 550 | 620 | ||||||||||||||||||||||||||||||
| Min. Mould Thickness | mm | 100 | 130 | 150 | 180 | 200 | 220 | 220 | 250 | 280 | 300 | 380 | 160 | 180 | 200 | 230 | ||||||||||||||||||||||||||||||
| Ejector Stroke | mm | 100 | 120 | 130 | 140 | 140 | 160 | 160 | 165 | 180 | 240 | 240 | 140 | 140 | 150 | 160 | ||||||||||||||||||||||||||||||
| Knockout Quantity | P | 5 | 5 | 5 | 5 | 5 | 9 | 9 | 13 | 13 | 13 | 21 | 5 | 5 | 5 | 9 | ||||||||||||||||||||||||||||||
| Ejector Tonnage | KN | 27 | 40 | 46 | 46 | 62 | 62 | 62 | 89 | 110 | 133 | 158 | 38 | 53 | 62 | 70 | ||||||||||||||||||||||||||||||
| OTHERS | ||||||||||||||||||||||||||||||||||||||||||||||
| Machine Weight | T | 2.9 | 3.2 | 4.5 | 5.2 | 6.4 | 7.8 | 9.1 | 11.9 | 16.5 | 19 | 21 | 4.8 | 5.7 | 7.8 | 10 | ||||||||||||||||||||||||||||||
| Motor Power | kW | 11 | 15 | 18.5 | 22 | 22 | 30 | 30 | 37 | 45 | 30+30 | 37+37 | 15 | 18.5 | 22 | 30 | ||||||||||||||||||||||||||||||
| Heater Power | kW | 6.3 | 8.7 | 10.8 | 12.5 | 14.9 | 17.4 | 17.4 | 18.5 | 31.3 | 33 | 43 | 7.4 | 9.9 | 11.5 | 13.5 | ||||||||||||||||||||||||||||||
| Overall Dimension | m | 4.1×1.1×1.65 | 4.2×1.2×1.8 | 5×1.4×1.8 | 5.2×1.3×2.2 | 5.6×1.4×2.2 | 6.1×1.5×2.3 | 6.4×1.5×2.4 | 7.5×1.9×2.4 | 7.8×2.0×2.3 | 8.1×2×2.3 | 9.2×2.1×2.4 | 4.5×1.4×1.8 | 5×1.5×1.9 | 5.5×1.6×2 | 5.9×1.8×2.3 | ||||||||||||||||||||||||||||||
| Max. Pump Pressure | Mpa | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 17.5 | 17.5 | 17.5 | 17.5 | ||||||||||||||||||||||||||||||
