Description

Technical Parameters

Product Features:

1. Vertical used injection molding machine: the injection device and clamping device of this type of injection molding machine are located in the same vertical centerline, the mold opens and closes along the front and back direction, occupies a small area and is suitable for fine molding.
2. Horizontal used injection molding machine: this is the most common type of injection molding machine, the injection device and clamping device is located on both sides of the mold, the mold is opened and closed along the horizontal direction, suitable for the production of large plastic products.
3. Servo used injection molding machine: This type of injection molding machine is driven by servo motors, which has the characteristics of energy saving, high efficiency, precision, etc. It is suitable for products requiring high injection precision.
4. Electric used injection molding machine: similar to servo injection molding machine, electric injection molding machine also uses electric power drive, but may be slightly different in speed and precision.

Hot Tags: used injection molder, China used injection molder manufacturers, suppliers, factory, Rubber Injection Machine, Rotary Injection Molding Machine, High Precision Molding Machine, Automatic Injection Machine, Preform Making Machine, Plastic Toy Moulding Machine

DESCRIPTION		UNIT	JM-150S		JM-300S		JM-400S		JM-550S		JM-850S		JM-1000S		JM-1200S		JM-1600S		JM-2000S		JM-2500S		JM-3000S		JM-4000S		JM-5000S		JM-6000S		JM-7000S
INJECTION UNIT	Screw Diameter	mm	22	25	25	28	28	32	32	35	35	40	40	45	45	50	50	55	55	60	65	70	75	85	80	90	90	100	95	105	100	110
	Injection Pressure	kg/cm²	1851	1433	1815	1446	2000	1531	2051	1713	1943	1488	1890	1493	1918	1553	1855	1533	2036	1710	2326	2005	2160	1685	1903	1503	1503	1218	1560	1278	1409	1164
	Theoretical Injection Volume	cm³	38	49	54	68	86	113	129	154	173	226	226	286	315	391	470	568	712	847	1376	1595	1830	2350	2080	2640	2640	3259	3890	4760	4315	5220
	Max. Shot Weight(PS)	g/oz	37/1.3	48/1.7	53/1.9	66/2.4	84/3	110/4	124/4.5	149/5	168/6.1	220/8	220/8	279/10	307/11	380/14	455/16	547/19	688/24	818/29	1328/48	1540/56	1771/64	2270/83	2015/73	2550/93	2574/93	3187/115	3760/137	4600/168	4172/152	5049/184
	Injection Rate	cm³/sec	26	34	42	53	46	59	53	63	78	102	116	147	149	182	150	180	155	184	136	158	200	250	245	310	465	574	450	550	496	601
	Screw Stroke	mm	100		110		140		160		180		180		240		240		300		415		415		415		415		550		550
	Screw Rotation Speed	rpm	0-200		0-200		0-200		0-180		0-220		0-275		0-370		0-235		0-220		0-200		0-240		0-240		0-240		0-180		0-180
CLAMPING UNIT	Clamping Force	ton	15		30		40		55		85		100		120		160		200		250		300		400		500		600		600
	Min. Mold Height	mm	100		120		200		220		250		280		300		300		300		400		400		400		400		500		500
	Opening Stroke	mm	180		180		200		200		250		280		300		300		400		400		400		400		400		500		500
	Max. Opening Distance	mm	280		300		400		420		500		560		600		600		700		800		800		800		800		1000		1000
	Distance Between Tie Bar	mm	275x135		355x205		400x250		500x340		560x340		580x420		610x510		750x580		860x530		800x530		890x590		890x590		890x590		1110x660		1110x660
	Platen Size	mm	430x290		520x370		580x430		720x560		795x575		830x670		830x740		1000x810		1130x800		1070x800		1180x880		1180x880		1180x880		1460x1010		1460x1010
	Ejector Stroke	mm	35		35		35		45		55		65		75		150		150		150		150		150		150		150		150
	Ejector Force	ton	1.2		1.2		2.3		2.3		4		5.4		5.4		11		11		11		11		11		11		11		11
OTHERS	Max. Hydraulic Pressure	kg/cm²	140		140		140		140		140		140		140		140		140		140		140		140		140		140		140
	Oil Tank Capacity	L	120		150		180		230		280		350		400		500		600		600		700		700		700		800		800
	Pump Motor Power	kW	3		4		5.5		7.5		11		15		15		18.5		22		22		30		30		45		55		55
	Barrel Heating Power	kW	3		3.5		4.2		5.4		5.4		6.3		10		12		14		16		17		17		17		20		20
	Machine Weight	kg	900		1000		1500		2200		3000		4000		7000		7500		8000		8000		11000		12000		13000		15000		16000
	Machine Dimensions	m	/		/		/		/		/		/		/		/		/		/		/		/		/		/		/

Used Injection Molder

Product Features: