The following points should be noted in the details of operation:
1. When lifting, if the force is applied to the pull rod, it must be protected with soft objects, otherwise it will cause scratches.
2. Before use, the injection molding machine must be lubricated; during use, it should be noted that the time interval between two lubrications should not be too long to ensure that the lubrication of related parts is in good condition, and attention should also be paid to the lubrication of other lubrication points.
3. When the power supply is just connected to start the injection molding machine, attention should be paid to the direction of the motor. If the oil pressure cannot be raised, it may be that the direction of the motor is connected in reverse. At this time, the order of the phase lines must be adjusted to ensure that the direction of the motor is correct.
4. Injection molding machines are generally equipped with mechanical safety devices, electrical safety devices, and hydraulic safety devices. It is strictly forbidden to operate and use the injection molding machine without any safety device.
