Vertical Insert Moulding Machine

1. Small footprint: vertical injection molding machine injection device and clamping device in the same vertical center line above, along the above and below the direction of opening and closing the mold, so its footprint is only about half of the horizontal machine, production performance is converted to The production performance is converted into about twice the floor space.
2. Convenient mold disassembly and assembly: Since the mold surface faces upward, inserts are easy to place and locate, and fully automatic insert molding can be easily achieved using a model with a fixed lower template and a movable upper template.
3. Easy to realize insert molding: Each cavity of the molded part can be taken out by a simple robot, which is conducive to precision molding. General mold clamping device around the open, easy to configure a variety of automation devices, suitable for complex, delicate products, automatic molding.
4. It is conducive to ensuring the fluidity of the resin in the mold and the consistency of the mold temperature distribution: the structural characteristics of the vertical injection molding machine include high injection pressure of the precision injection molding machine, the requirement of high stiffness of the clamping system, the parallelism of the moving and fixed templates is controlled at 0.08 ~ 0.10mm range, which helps to ensure the fluidity of the resin in the mold and the consistency of the mold temperature distribution.
5. Good seismic performance: vertical injection molding machine due to the low center of gravity, than the horizontal injection molding machine has a better seismic performance, withstood the test of many earthquakes.
6. Insert molding: Vertical injection molding machine can be pre-packed foreign material inserts (such as metal hardware) into the mold, and then injected into the resin, through the molten material and inserts of the bonding curing, made of integrated products. This process is suitable for the over molding of small metal hardware, such as bottle opener over molding, car key over molding, kitchenware over molding and so on.
7. Base on the injection molding: vertical injection molding machine can also be in the metal plate surface of the local injection molding, that is, in the metal substrate injection molding embedded parts. This process is suitable for the production of automobile parts, such as doors, roofs, compartments, etc., through the drawing process to improve its strength and hardness, thus enhancing the safety and durability of the car.