The production of vertical high-speed injection molding machines is a very complex process. During the manufacturer's production process, there are many temperatures that need to be paid attention to. These temperatures have a great influence on the shaping of the product, which is a key factor. During the production process of vertical high-speed injection molding machines, the following temperatures should be paid attention to: material temperature, oil temperature and mold temperature,
During the production process of vertical high-speed injection molding machines, due to the continuous movement of the equipment, the hydraulic oil in the equipment will constantly rub against each other, generate more and more heat, and increase the oil temperature. Therefore, during the production process, the oil temperature should be checked in time to keep the oil temperature at a normal temperature of about -45°C. If the oil temperature is too low or too high, it will bring various effects to the pressure transmission of the system and affect normal production.
Material temperature is also a problem that needs attention, and the material temperature is what we usually call barrel temperature, which generally depends on the materials used and the specific requirements of the product. In the production process of vertical high-speed injection molding machines, the material temperature changes continuously with different production needs, so it needs to be adjusted in time, but it cannot exceed the temperature required by the standard. In addition, the cycle and material need to be considered.
Mold temperature is also an important reference temperature and parameter in the production of vertical high-speed injection molding machines. Mold temperature has a great influence on the shaping of the product and whether it meets the standard. Therefore, when setting the mold temperature, product factors must be considered, not just temperature requirements, which will affect the normal and orderly progress of each process, and the standard rate of the products produced will be very low.
