Injection Molding Machine Safety Rules

1.1 General safety rules
Maintenance, repair and maintenance of the machine must be performed by experts who are sufficiently qualified and have extensive experience in the field of injection molding machines. They should be familiar with industrial life and safety standards, and should be familiar with the structure and function of the necessary machine safety equipment.
Note:
The safety devices installed on the machine are intended to protect the operator's life and ensure that the product is not damaged.
The machine must ensure that all safety devices are in normal working conditions before operation.
No safety device may be removed at will.
Safety facilities also include programs in the software, and no modification of the program is allowed.
If any accident or error occurs in the safety facilities, the machine must be turned off immediately;
The emergency stop button turns off the cooling water supply after about 20 minutes of the main power switch. The person in charge must be notified immediately.
Before restarting the machine, the fault must be eliminated.
1.1.1 Safety signs of the machine
Please pay attention to the safety signs during production, use Chinese and English, and be sure to follow the principle of "safety first".
1.1.2 Precautions during maintenance and repair
Attention!
All maintenance work must be carried out when the main power switch of the injection molding machine is set to "0". If necessary, lock it with a padlock.
The employer has the responsibility to let the operator know the structure and function of the safety facilities and take personal health and safety seriously.
Attention!
Any work that will damage the safety facilities of the machine should be stopped.
The employer must ensure that the operators are experienced and qualified operators.
Under no circumstances should the safety protection facilities be removed from the machine or not work. If it is necessary to remove the safety device to repair the machine, it must be safe. After the maintenance work is completed, reinstall the safety facilities as they were and check the effect.
Any change to the safety facilities without permission is not allowed!