1. The injection device and the mold clamping device are on the same vertical center line, and the mold opens and closes in the up and down direction. Its floor space is only about half that of a horizontal machine, so the productivity is about twice as large as the floor space.
2. The mold can be fixed in volume and easily placed on the mold to achieve movable molding of panel parts. The reason is that the conveyor surface faces the conveyor belt of the device and pulls the mold, so that the manipulator can easily put the embedded parts into the corresponding combination position. , fully automatic insert molding can be realized using easy-to-use mold plates.
3. The weight of the mold is supported by the horizontal formwork to open and close up and down. There will be no phenomenon like the horizontal machine that the mold falls forward due to the gravity of the mold, making the formwork unable to open or close. Helps maintain the accuracy of machinery and molds over time.
4. Each plastic part cavity can be taken out with a simple manipulator, which is conducive to precision molding.
5. Generally, the surrounding area of the mold clamping device is open, which makes it easy to configure various automation devices and is suitable for the automatic molding of complex and delicate products.
6. The belt conveyor device can be easily installed through the middle of the mold to facilitate automatic molding production.
7. It is easy to ensure the consistency of resin fluidity and mold temperature distribution in the mold.
8. Equipped with rotating table, movable table and tilting table, it is easy to realize insert molding and in-mold combination molding. For more information on crushing machinery, please stay tuned to Powder Circle.
9. During small batch trial production, the mold structure is simple, low-cost, and easy to disassemble and assemble.
10. Having withstood the test of many earthquakes, the vertical machine has better earthquake resistance than the horizontal machine due to its low center of gravity.
